How to install a range hood vent through ceiling[Step by Step] 2021

Worried about installing your hood? Want to know Install A Range Hood Vent Through Ceiling? This is the last day for it. the solution is here. Nowadays, range hoods have become a very important part of your kitchen.

How to install a range hood vent through the ceiling

It’s important to know How to install hood. You cannot think of any other way of getting rid of the warm kitchen air and odor outside without it. With enough reasons to get one for your own, do you know how to install one? You probably will learn it because there are tons of tutorials out there. However, the crucial part of installing a range hood is to make a decision about the ventilation ducts.

There are several factors to look at. First of all, for Install A Range Hood the location of your kitchen in the house plays a great role. Secondly, the location of the range is also important. Depending on these and some additional scenarios, you need to determine whether it is better to vent through an outside wall of the kitchen or the roof.

Why Venting Through the Ceiling is a Good Option?

Based on the thoughts of some experts in this area, installing a range hood through the roof/ceiling is not hard at all. Some basics will be just fine to lead you towards installing your own range hood ventilation through the ceiling of your house. Yet, the fact that it is easy to install doesn’t actually mean it is beneficial.

As you vent it through the ceiling, it is more efficient than venting it through a wall. There is vertical aerodynamics that effectively puts out the hot air of the kitchen and helps you keep your kitchen environment normal.

How Much Time Does it Take?

While it completely depends on your skill, installing a range hood vent through the ceiling generally takes about 5-6 hours. If you are a beginner, the time may end up being eight hours.

Make sure you have all the tools and information you need before starting with the process. Don’t pause and learn something to continue again. Trust me, that just increases the time.

Install Your Range Hood Through The Ceiling

Call it a DIY project for your free time or anything else, but installing a range hood vent through the ceiling can save you the cost of having to pay a professional. You can easily do it as there is no rocket science required. You can definitely do it all by yourself without any technical minds help.

How to install a range hood vent through the ceiling

Required Tools and Materials

Before diving into the installation process, make sure you have all these things-

  • Safety Glasses
  • Electric Drill
  • Reciprocating Straw
  • Gloves
  • Drywall Saw
  • Hammer
  • Tape Measure
  • Wire Cutter
  • Duct Flashin
  • Roofing Tar
  • Duct Strap
  • Wire Nuts
  • Metal Ducting
  • Screw Anchors

A couple of other necessary things may be added throughout the process. Look out for them as well.

Steps For Installation

In order to do the job successfully, follow these steps consecutively, and don’t skip any of them.

Remove Necessary Parts for install your range hood

Firstly, you must remove the parts that are nothing but complimentary and can interfere in the installation process. Things like fan, filter, electrical housing must be removed. After you have them removed, make sure the hole on the top of your hood is open.

Outline the Part Of Your Ceiling

install a range hood vent through the ceiling

Now that you have removed all the things from the range hood and made it ready, the second thing to do is to make an outline on a certain part of the ceiling where you want to install your vent. Just hold your vent on the ceiling and use a marker to outline the dimensions. Do this exact thing for both sides.

Drill and Make Holes on the Ceiling & Vents on Roof

With the outlines created on the ceiling, it’s time to drill holes on all four corners of the outlined portion to make it ready for the mounting process. Use a reciprocating saw to cut the parts following the outline from one hole to another. Repeat the step until all the outlines are covered. While you are in this step, don’t forget to drill a hole on the ceiling board. This is the hole from where the cables will pass through.

So, have you made a path on the ceiling? You can now go ahead and create a hole on the roof as well that will see the hood vent go outside. With a little bit of patient, you can gain better accuracy. Do it just the way you did it for the ceiling. If possible, you can rely on the first one while making the second. Take your time as errors can’t be usually altered.

Join and Install the Vent Hoods

After you have created the paths, it is time to join them all and start the installation process. Start passing the top of the hood through the path leading the way to outside. Make sure that you duct the hood correctly in order to avoid leaks in the future. Moreover, don’t obstruct the damper in the hood with the duct tape.

Seal the Top Portion of the Vent

Now the time has come to seal the ducting that goes through the ceiling and complete the installation. Don’t lose your focus in this stage otherwise, it’s going to take a while. Remember we stated roofing tars as one of the things to collect? You can use that to seal the parts. Especially the joints that are located between the flashing and the duct, these are tricky places. After going through all these steps, place the vent cap over the duct of the hood so any unwanted object doesn’t fall inside it and create a jam.

You can now go ahead and integrate all the filters and fans that were removed as a part of the first step. After reconnecting, turn the power on and clean everything. Congratulations, you have a range hood vent installed through the ceiling.If you want to know how many CFM you need in the kitchen.

Summing Up

We hope these steps help you install your own vent through the ceiling. There are plenty of DIY projects like this that you can do. Just keep in mind, doing it quickly doesn’t mean doing it efficiently. As a beginner, your focus should be on doing the project right rather than fast. As you are drilling and making holes, it will take a long time to alter them. So, it’s better to take all the precautions and steps in mind before starting such a thing.

F.A.Q

Range hoods have to be vented outside?

Since they don’t need to vent to your home’s exterior and are ductless, you are not required to install them only where there is a duct. These hoods operate by filtering the air they suck in and then blowing it back out into the room, essentially using a recirculation process.

Do you need an electrician to install a range hood?

If you read the fine print, your warranty will probably state that the rangehood must be installed by a factory approved service technician. … If you need to have an outlet for electricity installed, only a licensed electrician can legally do this.

What type of duct is best for venting a range hood?

The more powerful the hood, the larger the duct. For instance, a typical 400-cfm unit requires a 6-inch duct, while a 1,200-cfm model needs a 10- to 12-inch duct. For the best airflow, use smooth galvanized metal ducting rather than flexible or corrugated ducting.


How do you vent a kitchen without a hood?

Use a window fan. …
Also, Use a portable HEPA air filter. …
Use a fan in another room, like the bathroom. …
Get a grease splatter guard. …
Wipe down your kitchen cabinets frequently. …
If you paint your kitchen, use a satin or semi-gloss finish, or choose scrubbable paint.

You can check our another topic kobe hood

As an affiliate associate, I earn from qualifying purchases.

6 thoughts on “How to install a range hood vent through ceiling[Step by Step] 2021”

  1. Pingback: How many CFM do you need for your range hood Homo Kitchen

  2. Pingback: Top Latest 9 KOBE Range Hood Review | Homo Kitchen

  3. Pingback: Best Quality Lighting | Homo Kitchen

  4. Pingback: Best Gas Grills Under 200 | Homo Kitchen

  5. Pingback: How to install glacier bay kitchen faucet in 2021 | Homo Kitchen

Leave a Comment

Your email address will not be published. Required fields are marked *